how to offset deck boards

Decks.com. Decking Patterns.An octagon can be decked as an offset pattern that follows the shape of the frame. ... Deck boards should be fastened at every joist by 2 nails, 2 screws, or some kind of hidden fastener system. ... Wood deck boards are usually available in 2' increments while most composite decking materials are limited to 12',16',20'.

How to Stagger Deck Boards | Home Guides | SF Gate.Wooden decks are a common exterior addition to homes, allowing families extra space to use when enjoying the outdoors. Decks feature planks for walking on, but if these boards are shorter than the deck's width, more than one plank has to be used per row. Patterns from staggered joints are a way of helping to spread any...

Set and Nail Decking Perfectly | Family Handyman.Building a deck? Learn tricks for straightening crooked boards; making crisp, straight cuts on the board ends; and avoiding problems like hammer marks and u.

Staggered Joints For Decking - DecksGo.Jan 9, 2009 ... On a 24' x 18' deck using 12' material running the 18' width is it better to stagger the joints or have all the joints on one side of the deck? If staggered, ... of the deck? If staggered, what is the offset 2', 4', 6'? ... You should consider staggering the joints and I would cut some of the deck boards into 6' lengths.

Tips for How to Build a Deck | Family Handyman.The traditional way most builders go about decking is to randomly stagger joints. The result is that end-to-end deck boards share the 1-1/2-in. thickness of each joist. That can cause problems, especially with wood decks. With only 3/4 in. of nailing surface, fasteners will cause ends to split, and since the board ends have to...